How To Buy A Pool Heater

0
50
How To Buy A Pool Heater
How To Buy A Pool Heater

How To Buy A Pool Heater: Solar pool heaters can be a great long-term investment, but the buying process can feel intimidating.

Don’t worry, all it takes is some careful planning, a little research to find the right solar heater setup for your pool.

Check it out.

First, how does a solar pool heater actually work?

Well, when water is pumped from your swimming pool through your filter system and back, the water passes through a group of solar collectors, warming it up.

There are pros and cons to using a solar pool heater. For one thing, they’re expensive and can cost between $3000 and $4000 to buy and install.

But they’ll save you energy and money over the long run.

And they can last up to 15 to 20 years, Which is longer than gas or heat pumps.

But remember, the solar heater is only as good as the amount of sun it gets.

Okay, what do you need for a solar heater setup?

First, you’ll need a solar collector.

This warms the pool as it circulates through and you’ve got two options: Unglazed collectors, which are heavy-duty rubber or plastic panels.

They’re treated with an ultraviolet light inhibitor to protect them from damage and you have Glazed collectors, which use copper tubing on an aluminum plate and have an iron tempered glass cover.

They are more expensive, but they’re also more durable.

How To Buy A Pool Heater

How To Buy A Pool Heater
How To Buy A Pool Heater

So, cheaper unglazed panels will save you money upfront, but they require more maintenance in the long run.

Next, you’ll need a lot of space in your yard or on your roof.

The surface area of your solar collectors should equal about 75% of your swimming pool’s total surface area.

This is called the 3/4 rule.

If you keep your pool open year-round, bump that up to 100%.

For example, if you have a 16 by 32 pool that’s open part of the year, you’ll need about 384 square feet of solar collectors to keep it cool.

And finally, you’ve gotta have the right setup.

You’ll need a pool filter, which removes debris before its pumped through your solar collector.

Of course, you’ll need a pump because solar collectors are big and they need a powerful pump.

And so, you might need to upgrade your existing pump to a larger one.

And finally, you’ll need a flow control valve, and this valve diverts pool water through your solar collector for warmth. covering everything you need to know about pool maintenance.

It’s packed with money-saving tips so you can save money and time keeping your swimming pool clean.

This is the ultimate manual for every type of pool, including in-ground, above-ground, and Intex blow-up pools.

And the best part is we always keep it up to date, so, once you buy it, you have access to the latest and greatest version for life.

Next, how do you decide where your solar collectors go?

You can mount solar collectors almost anywhere near your pool.

But they need the right orientation, the right tilt, and enough sun exposure.

How To Buy A Pool Heater
How To Buy A Pool Heater

Orientation is the direction the panels are facing.

If you’re in the Northern hemisphere, your solar collectors should face south where you’ll get the most sun, and depending on where you live, you may be able to face it up to 45 degrees east or west.

The other factor is tilt or the angle of the panels.

This depends on your latitude or how far you are from the equator and how long you keep your pool open each year.

The further away you are from the equator, the more you’ll want to tilt your collectors up.

The third factor is your location’s available sunlight.

How much sun does your backyard get in a day, or a week, or a pool season?

If you’re building on an unshaded,south-facing area, you’re good to go.

You can compensate for less sunlight with a higher efficiency system.

Okay, now it’s time to go shopping for a solar collector.

What should you look for?

You wanna pay attention to its thermal performance rating, these are in BTU’s per day or British thermal units, or MJs per day or megajoules.

High-efficiency systems not only produce more power, but they also need fewer panels.

The system within 25 BTUs a day of one another is roughly the same.

If you know the price and efficiency of the models you’re considering, you can calculate how much energy the solar collector will produce for every dollar you spend.

For example, if you know that you need 21,000 BTU’s a day, each collector panel costs about $387, you get 54.26 BTU’s per
day per dollar spent.

It takes a little math, but once you know the numbers, you can shop for the biggest bang for your buck, and start soaking up the sun.

And that’s it, that’s all you need to know about buying a solar heated pool for your pool.


LEAVE A REPLY

Please enter your comment!
Please enter your name here